Brother VERSION 0 MFC-J6510DW - Manual (Page 21)

Sending a fax
15
3
Canceling a Broadcast in progress
3
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialed and the Broadcast job number.
d
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes
i Press 1
No i Press 2
e
Press 1 to cancel the fax number being
dialed.
The LCD will then show the Broadcast
job number.
f
Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes
i Press 1
No i Press 2
g
To cancel the Broadcast, press 1.
h
Press Stop/Exit.
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press (FAX).
b
Press a or b to choose Real Time TX.
c
Press d or c to choose On (or Off).
Press OK.
Note
• If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
Overseas Mode
3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Press (FAX).
b
Load your document.
c
Press a or b to choose
Overseas Mode.
d
Press d or c to choose On (or Off).
Press OK.