Brother VERSION 0 MFC-J6510DW - Manual (Page 11)

General setup
5
1
Dial Prefix
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number
1
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Dial Prefix.
Press OK.
d
Press a or b to choose On (or Off).
Press OK.
e
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• If your telephone system requires a timed
break recall (hookflash), press Hook to
enter the break.
• You can use the numbers 0 to 9, #, l
and !. (Press Hook to display !.)
You cannot use ! with any other numbers
or characters.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
f
Press Stop/Exit.
Changing the prefix number
1
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Dial Prefix.
Press OK.
d
Press a or b to choose On.
Press OK.
e
Do one of the following:
 To change the prefix number, press
a
or b to choose Change.
Press OK.
 To exit without making a change,
press a or b to choose Exit.
Press OK. Go to step g.
f
Enter a new prefix number using the dial
pad (up to 5 digits), press OK.
g
Press Stop/Exit.