Blaupunkt BREMEN MP76 - Manual (Page 9)

61
EN
GLISH
Volume
You can adjust the volume in steps from 0
(off) to 50 (maximum).
To increase the volume,
turn the volume control
2 clockwise.
To decrease the volume,
turn the volume control
2 counter-
clockwise.
Setting the power-on volume
You can set the default volume level at which
the device plays when it is switched on.
Press the MENU button
9.
Press the softkey
5 with the display
label "VOLUME".
Press the softkey
5 with the display
label "ON VOL".
Adjust the desired volume with volume
control
2.
Press the OK joystick
8 or the MENU
button
9 to exit the menu.
The settings are saved.
Note:
The volume played last before switch-
off can also be selected as the power-
on volume. For this purpose, press the
softkey with the display label "LAST
VOL" in the Volume menu
u
u
u
u
u
u
u
Risk of injury!
If the power-on volume is set to
maximum, the volume level can be very
high when the device is switched on!
If the volume was set to maximum be-
fore the device was switched off and the
power-on volume is set to "LAST VOL",
the volume level can be very high when
the device is switched on again!
Severe damage to your hearing can be
caused in both cases!
Mute
You can decrease the volume abruptly.
Briefl y press button
1.
The display shows "MUTE".
Cancelling mute
Briefl y press button
1 again
or
turn the volume control
2.
Telephone audio
If your car sound system is connected
with a cell phone, "picking" up the phone auto-
matically mutes the car sound system and the
call is layed back via the loudspeakers
of the card sound system. For this pur-
pose, the cell phone must be connec-
ted to the device as described in the instal-
lation instructions.
u
u
u
Volume
02a_BremenMP76_eng.indd 61 02a_BremenMP76_eng.indd 61 07.07.2006 14:44:22 Uhr 07.07.2006 14:44:22 Uhr