Blaupunkt BREMEN MP76 - Manual (Page 48)

100
Move the joystick
8 left or right to se-
lect among the available frequencies.
Move the joystick
8 up or down to
select the desired quality factor for the
defi ned frequency.
When you have fi nished making your
changes,
press the OK joystick
8 or the AUDIO
button
:.
Adjusting the centre speaker
You can select the frequency at which a
connected centre speaker should be con-
trolled.
You can select from the frequencies
"200 Hz", "400 Hz", "800 Hz", "1600 Hz"
and "3200 Hz". If you select the setting
"FLAT", all frequencies are output via the
centre speaker, including bass. This set-
ting should be selected only if your centre
speaker features a built-in high-pass fi lter.
In addition to the frequency, you can adjust
the level for the centre speaker.
Press the AUDIO button
:.
"AUDIO MENU" appears on the display.
Press the NEXT button
4.
"AUDIO MENU 2" appears on the display.
Press the softkey
5 with the display
label "CENTRE".
Press the joystick
8 left or right to
adjust the frequency for the centre
speaker.
Press the joystick
8 up or down to ad-
just the level for the centre speaker.
u
u
u
u
u
u
u
u
When you have fi nished making your
changes,
press the OK joystick
8 or the AUDIO
button
:.
Adjusting high-pass fi lters for
front/rear
You can adjust a separate high-pass fi lter for
the front and the rear channel that fi lters all
frequencies below the adjusted frequency
so that the fi ltered frequencies are played
only by a connected subwoofer.
If you select the setting "FLAT", no frequen-
cies are fi ltered and all signals are forward-
ed to the loudspeakers. The setting "AUTO"
automatically adjusts the high-pass fi lter to
the value defi ned for the low-pass fi lter.
Press the AUDIO button
:.
"AUDIO MENU" appears on the display.
Press the NEXT button
4.
"AUDIO MENU 2" appears on the display.
Press the softkey
5 with the display
label "HIPASS F" for setting the front
high-pass fi lter.
Or
Press the softkey
5 with the display
label "HIPASS R" for setting the rear
high-pass fi lter.
Press the joystick
8 left or right to
adjust the frequency for the high-pass
fi lter.
When you have fi nished making your chang-
es,
press the OK joystick
8 or the AUDIO
button
:.
u
u
u
u
u
u
u
Subwoofer and centre speaker
02a_BremenMP76_eng.indd 100 02a_BremenMP76_eng.indd 100 07.07.2006 14:44:30 Uhr 07.07.2006 14:44:30 Uhr