beautypg.com

Setting the display illumination colour – Blaupunkt BREMEN MP76 User Manual

Page 14

background image

66

Setting the display illumination
colour

When setting the display illumination, you
can choose one of four preset colours or
you can mix a colour yourself from the RGB
spectrum (red-green-blue) or you can se-
lect a colour during a colour scan.

Selecting a preset colour
Four different colours are already stored in
the device. "Ocean" (blue), "Amber", "Sun-
set" (red-orange) and "Nature" (green) are
available. Select a colour that best suits
your vehicle interior.

Press the

MENU button

9.

Press the softkey

5 with the display

label "DISPLAY".

Press the softkey

5 with the display

label "COLOR".

Press the softkey

5 with the display

label of the desired colour.

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

The settings are saved.

Mixing a colour for the display
illumination
To customise the display illumination to suit
your taste, you can mix a colour yourself
using the three primary colours red, green
and blue.

Press the

MENU button

9.

Press the softkey

5 with the display

label "DISPLAY".

Press the softkey

5 with the display

label "COLOR".

Press the softkey

5 with the display

label "USER".

u
u

u

u

u

u
u

u

u

The following menu allows you to defi ne
the components of the three colours
red, green and blue. For this purpose,
repeatedly press the corresponding
softkey

5 until the colour displayed

corresponds to your taste.

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

The settings are saved.

Selecting a display illumination colour
during a colour scan

Press the

MENU button

9.

Press the softkey

5 with the display

label "DISPLAY".

Press the softkey

5 with the display

label "COLOR".

Press the softkey

5 with the display

label "COL-SCAN".

The device starts changing the display illu-
mination colour.

If you want to select one of the colours,
press the softkey

5 with the display

label "SAVE".

If you want to return to the previous
menu without changing the colour,
press the softkey with the display label
"BREAK".

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

The settings are saved.

u

u

u
u

u

u

u

u

u

Display

02a_BremenMP76_eng.indd 66

02a_BremenMP76_eng.indd 66

07.07.2006 14:44:23 Uhr

07.07.2006 14:44:23 Uhr