Scanning receivable stations (scan), Setting the scanning time, Storing stations – Blaupunkt BREMEN MP76 User Manual

Page 21: Storing stations automatically (travelstore)

GLISH

Scanning receivable stations
(SCAN)

You can use the scan function to play all the
receivable stations brieﬂ y. You can set the
scanning time in the menu to between 5
and 30 seconds.

Starting SCAN

Press and hold down the

OK joystick

8 for longer than two seconds.

Scanning begins. "SCAN" appears brieﬂ y
on the display followed by a ﬂ ashing display
of the current station name or the frequen-
cy of the station.

Cancelling SCAN and continuing
listening to a station

Press the

OK joystick

Scanning stops and the radio continues
playing the station that it tuned into last.

Setting the scanning time

Press the

MENU button

Press the softkey

5 with the display

label "VARIOUS".

Press the softkey

5 with the display

label "SCANTIME".

Move the joystick

8 up or right or

down or left to set the scan time.

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

The settings are saved.

Note:
The deﬁ ned scanning time is also ap-
plied by the system to scanning carried
out in CD/MP3 and CD-changer mode.

u
u

Storing stations

Storing stations manually

Select the desired FM memory bank
(FM1, FM2, FM3, FMT) or one of the
wavebands (MW, LW or SW).

Tune into the desired station as de-
scribed under "Tuning into a station".

Press and hold down one of the six
softkeys for longer than two seconds to
which you want to assign the station.

Storing stations automatically
(Travelstore)

You can automatically store the six stations
offering the strongest reception in the re-
gion (FM only). The stations are stored in
the FMT memory bank.

Notes:

If your device is set to the region USA,
you can also start the Travelstore in
the AM radio mode. The stations are
then stored on the AMT level.

Any stations that were previously
stored in this memory bank are de-
leted in the process.

Starting the Travelstore function

Press the

TUNER button

= in radio

mode.

The display shows the radio function menu.

Press the softkey

5 with the display

label "T-STORE".

The storing procedure begins. "TRAVEL
STORE" appears on the display. After the
process has completed, the radio will play
the station that is stored in memory location
one of the FMT (or AMT) memory bank.

•

Radio mode

02a_BremenMP76_eng.indd 73

07.07.2006 14:44:24 Uhr