Blaupunkt BREMEN MP76 - Manual (Page 20)

72
Tuning into a station
There are various ways of tuning into a sta-
tion.
Automatic station seek tuning
Move the joystick
8 up or down.
The radio tunes into the next receivable sta-
tion.
Tuning into stations manually
You can also tune into stations manually.
Note:
You can only tune into stations manu-
ally if the RDS function is deactivated.
Move the joystick
8 to the left or the
right.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
Note:
The convenient RDS function must be
activated before you can use this fea-
ture. When using this feature, you will
only be able to switch to stations that
you have received once before already.
Move the joystick
8 to the left or the
right.
u
u
u
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
press the TUNER button
= in radio
mode.
The display shows the radio function
menu.
Press the NEXT button
4.
Note:
If you call up the radio function menu in
the MW or LW radio mode, the softkey
with the display label "SENS" is on the
fi rst page.
Press the softkey
5 with the display
label "SENS".
Press the softkey
5 with the display
label "FM" or "AM" to set the sensitivity
for "FM" or "AM".
Move the joystick
8 up or right or
down or left to set the sensitivity.
You can adjust the sensitivity in increments
from 1 to 6. "Sensitivity 1" is the lowest,
"Sensitivity 6" the highest sensitivity for
very remote stations.
Press the OK joystick
8 or the MENU
button
9 to exit the menu.
The settings are saved.
u
u
u
u
u
u
Radio mode
02a_BremenMP76_eng.indd 72 02a_BremenMP76_eng.indd 72 07.07.2006 14:44:24 Uhr 07.07.2006 14:44:24 Uhr