beautypg.com

Navigation audio – Blaupunkt BREMEN MP76 User Manual

Page 10

background image

62

If the sound system receives a traffi c an-
nouncement during a telephone call, you
will only be able to hear the traffi c an-
nouncement after the call is fi nished (in so
far as the traffi c announcement is still being
broadcast).

If the sound system receives a call during
a traffi

c announcement, the playback

of the traffi c announcement is interrupted
and the call is answered.

You can adjust the volume with which the
telephone calls are answered.

Press the

MENU button

9.

Press the softkey

5 with the display

label "VOLUME".

Press the softkey

5 with the display

label "PHONE" to set the volume.

Adjust the desired volume with volume
control

2.

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

The settings are saved.

Note:
During the phone call, you can always
change the volume by means of the vol-
ume control

2.

u
u

u

u

u

Navigation audio

Instead of a second external audio source
("AUX2", see "External audio sources"), you
can also connect a navigation system.

If your car sound system is connected to
navigation system, the voice output of the
navigation is "mixed" in with the current au-
dio source and played back using the loud-
speakers of the car sound system.

For this purpose, the navigation system be
connected to the car sound system as de-
scribed in the installation instructions and
switched on in the menu.

You can fi nd out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.

Activating the navigation audio
You can connect either a second external
audio source or a navigation system to this
device. For this purpose, you must defi ne
in the menu which device has been con-
nected.

Press the

MENU button

9.

Press the softkey

5 with the display

label "AUX".

The AUX menu is displayed.

If you connected a navigation system,
press the softkey

5 with the display

label "NAV/AUX2" repeatedly until the
setting "NAVIGATION ON" appears.

Press the

OK joystick

8 or the MENU

button

9 to exit the menu.

The settings are saved.

u
u

u

u

Volume

02a_BremenMP76_eng.indd 62

02a_BremenMP76_eng.indd 62

07.07.2006 14:44:22 Uhr

07.07.2006 14:44:22 Uhr