beautypg.com

Switching tim on/off – Blaupunkt BREMEN MP76 User Manual

Page 24

background image

76

TIM – Traffi c Information
Memory

The device features a digital voice memory
which allows for automatically recording up
to four traffi c announcements. The maxi-
mum length for recorded messages is four
minutes.

If the TIM function is activated, all traffi c an-
nouncements that are received two hours
after the last switch-off of the device are
recorded. In addition, you can also set two
fi xed times (Timer). All traffi c announce-
ments that are broadcast 30 minutes be-
fore and 90 minutes after the specifi ed
time on the selected traffi c announcement
program are recorded. This function is par-
ticularly useful if you are using your car at
fi xed times.

If the last message is older than six hours,
all messages are deleted.

If a new traffi c announcement arrives dur-
ing the TIM playback, the playback is inter-
rupted and the new message is recorded.

Risk of damage to the motorised
antenna in a car wash. An auto-

matic motorised antenna remains ex-
tended if TIM is activated and you switch
off the device. In a car wash, the extend-
ed motorised antenna may cause dam-
ages. For further information, please
read the section entitled "Switching TIM
off".

Switching TIM on/off

If the car sound system is switched on, you
can switch the TIM functions on or off.

In radio mode, hold the

TUNER button

= pressed for longer than two sec-
onds.

The TIMPLAY menu is displayed.

If traffi c announcements were recorded,
the last message is played. The most cur-
rent message has the number "TIM1". The
station name/frequency appears in the top
line of the display and the time of the re-
cording in the bottom line.

"TIM" and the number of the message ap-
pear next to the top two softkeys on both
sides of the display.

If no messages are recorded, "NO TIM"
briefl y appears on the display.

Switching TIM off
If you want to switch TIM off,

In radio mode, hold the

TUNER button

= pressed for longer than two sec-
onds.

The TIMPLAY menu is displayed.

Press the

NEXT button

4.

The TIMSET menu again.

Press the softkey

5 with the display

label "TIM ON" repeatedly until "TIM
RECORD OFF" appears on the display.

press the

TUNER button

= or the OK

joystick

8.

The settings are saved.

u

u

u

u

u

TIM – Traffi c Information Memory

02a_BremenMP76_eng.indd 76

02a_BremenMP76_eng.indd 76

07.07.2006 14:44:25 Uhr

07.07.2006 14:44:25 Uhr