Blaupunkt BREMEN MP76 User Manual

Page 19

GLISH

press the

TUNER button

= or the OK

joystick

The settings are saved.

Selecting the waveband/memory
bank

This device can receive programmes broad-
cast over the FM frequency range as well as
the MW, LW and SW (AM) wavebands. Four
memory banks are available for the FM
waveband and one memory bank each for
the wavebands MW, LW and SW.

In dynamic radio mode, up to ﬁ ve levels are
available.

Six stations can be stored in each memory
bank.

Note:
If your device is set to the region USA,
you can select between the wavebands
FM and AM. In addition, the memory
banks AM1, AM2, and AMT are avail-
able for the AM waveband.

Selecting a waveband
To select an FM, MW, LW or SW waveband,

press the

TUNER button

= in radio

mode.

The display shows the radio function
menu.

Press the softkey

5 with the display

label "BAND".

Press the softkey

5 with the display

label "FM" for the FM waveband.

Press the softkey

5 with the display

label "MW" for the MW waveband.

Press the softkey

5 with the display

label "LW" for the LW waveband.

Press the softkey

5 with the display

label "SW" for the SW waveband.

The basic radio menu of the selected wave-
band is displayed.

Selecting the FM memory bank
To switch between the FM memory banks
FM1, FM2, FM3 and FMT,

press the

NEXT button

4 repeatedly

until the display shows the desired
memory bank.

The memory banks are called in sequence
from FM1 to FM2, FM3 and FMT.

Note:
If your device is set to the region USA
and you selected the AM waveband,
you can use the

NEXT button

4 to se-

lect from the AM memory banks AM1,
AM2 and AMT.

Radio mode

02a_BremenMP76_eng.indd 71

07.07.2006 14:44:24 Uhr