Specify the type of amp you’ve connected, Quick guide, Press – Boss Audio Systems GT-100 User Manual
Page 9: Use to choose “output select, Use to select the type of amp you’re using
9
Quick Guide
Q
uick G
uide
O
ver
vie
w
O
utputting S
ound
Eff
ec
ts
Sa
ving
Pedal S
ettings
Sy
st
em
MIDI/USB
A
ppendic
es
Now you’re ready to get started! The following pages explain how to play using the GT-100.
4
Specify the type of amp you’ve connected
In order to ensure optimal sound, you should specify the type of amp you’ve connected to the GT-100. Please take a moment to do
this.
1.
Press
.
2.
Use
to choose “OUTPUT SELECT .”
3.
Use
to select the type of amp you’re
using .
Value
Explanation
JC-120
Choose this setting if the GT-100 is connected to the
guitar input of a Roland JC-120 guitar amp.
SMALL AMP
Choose this setting if the GT-100 is connected to a
small guitar amp.
COMBO AMP
Choose this setting if the GT-100 is connected to the
guitar input of a combo-type guitar amp (i.e., a single
unit that contains the amp and speaker) other than
the JC-120.
For some types of guitar amps, the “JC-120” setting
might produce better results.
STACK AMP
Choose this setting if the GT-100 is connected to the
guitar input of a stack-type guitar amp (i.e., one in
which the amp and speaker are separate units).
JC-120 RETURN
Choose this setting if the GT-100 is connected to the
RETURN jack of the JC-120.
COMBO RETURN
Choose this setting if the GT-100 is connected to the
RETURN jack of a combo-type guitar amp.
STACK RETURN
Choose this setting if the GT-100 is connected to the
RETURN jack of a stack-type guitar amp. You should
also choose the “STACK RETURN” setting if you’re
using a guitar power amp together with a speaker
cabinet.
LINE/PHONES
Choose this setting if you’re using headphones, or if
the GT-100 is connected to a keyboard amp, mixer, or
digital recorder.
4.
Press
.
MEMO
• The SP Type parameter is valid only if the Output Select setting is set to “LINE/PHONES.” For the detail on SP TYPE parameter,
download “GT-100 Parameter Guide” (PDF file) from “GT-100” in the “Owner’s Manuals” list on the Roland website (http://www.roland.
com/support/en/).
• When using headphones, you won’t be able to obtain a sound that is typical of a guitar amp unless you turn on a preamp. We
recommend that you turn on a preamp whenever you’re using headphones. For the detail on PREAMP, refer to “GT-100 Parameter
Guide” (PDF file).