Boss Audio Systems GT-100 - Manual (Page 43)

Making Global Settings (System Settings)
43
Q
uick G
uide
O
ver
vie
w
O
utputting S
ound
Eff
ec
ts
Sa
ving
Pedal S
ettings
Sy
st
em
MIDI/USB
A
ppendic
es
USB-Related Settings
Here you can make USB-related settings for when the GT-100 is connected to a computer via USB.
USB audio flow
MIX
Level
OUTPUT
Level
GT-100
USB IN
USB OUT
INPUT
OUTPUT
Effect Chain
USB IN-OUT MODE: NORMAL
MIX
Level
OUTPUT
Level
Effect Chain
GT-100
USB IN
USB OUT
INPUT
OUTPUT
USB IN-OUT MODE: DRY OUT
INPUT
Level
OUTPUT
Level
Effect Chain
GT-100
USB IN
USB OUT
INPUT
OUTPUT
USB IN-OUT MODE: REAMP
Reference
For details on USB connection, refer to “Using the GT-100 Connected to a Computer Via USB” (p. 49).
USB
Parameter Value Explanation
USB IN-OUT MODE
Setting the USB audio flow
Here you can specify the audio flow for USB input/output.
NORMAL
The guitar input will be sent through the GT-100’s effects and output to the computer. The input from the computer will be
mixed with the GT-100’s output, and then output.
DRY OUT
The sound of the guitar processed by the effects will be monitored, while the guitar input will be output to the computer
without passing through the GT-100’s effects. The input from the computer will be mixed with the GT-100’s output (effect-
processed guitar sound) and then output.
REAMP
The sound being input from the computer will pass through the GT-100’s effects, and then be output from the GT-100’s OUTPUT
and USB OUT. With this setting, the guitar sound recorded on the computer can be played back through the GT-100’s effects
and output from the GT-100’s guitar OUTPUT and USB OUT.
* If REAMP is selected, the GT-100’s INPUT cannot be used.
MIX LEVEL
Setting the MIX LEVEL
Adjusts the level of the audio input from the computer that will be mixed with the sound processed by the GT-100’s effects when “USB IN-OUT MODE” is
not set to “REAMP”.
0–200 % Adjusts the level of the audio input from the computer that will be mixed with the sound processed by the GT-100’s effects.
INPUT LEVEL
Setting the INPUT LEVEL
Adjusts the input level from the computer to the GT-100’s effects when “USB IN-OUT MODE” is set to “REAMP”.
-20–+20 dB Adjusts the input level from the computer to the GT-100’s effects .