Boss Audio Systems GT-100 - Manual (Page 29)

Creating Sounds (Effects)
29
Q
uick G
uide
O
ver
vie
w
O
utputting S
ound
Eff
ec
ts
Sa
ving
Pedal S
ettings
Sy
st
em
MIDI/USB
A
ppendic
es
Using Send/Return
You can connect an external effects processor between the SEND
jack and RETURN jack, and use it as one of the GT-100’s effects
processors.
The sound that is input to SEND/RETURN within the effect chain will
be output to the SEND jack. The sound that is input via the RETURN
jack will be input to SEND/RETURN within the effect chain.
1.
Press the [EFFECT] button .
2.
Use knob [4] to select “SEND/RETURN .”
3.
Use knobs [5]–[8] to make settings .
Con-
troller
Parameter Value Explanation
[5] MODE
NORMAL
The input to SEND/RETURN within the
effect chain will be output to the SEND
jack, and the input from the RETURN jack
will be output following SEND/RETURN.
Use this setting if you want to connect an
external effects processor in series within
the GT-100’s effect chain.
SEND RETURN
DIRECT
MIX
The input to SEND/RETURN within the
effect chain will be output to the SEND
jack, and the input from the RETURN
jack and the input to SEND/RETURN (the
direct sound) will be mixed and output
following SEND/RETURN.
Use this when you want to mix the
GT-100’s effects sounds together with the
sound with the external effects device
applied to it.
SEND RETURN
BRANCH
OUT
The input to SEND/RETURN within the
effect chain will be output to the SEND
jack. The input from the RETURN jack will
be ignored.
For example, by placing SEND/RETURN in
the GT-100’s effect chain in front of reverb
or delay, this allows you to use the SEND
jack as a direct out.
SEND
[7]
SEND
LEVEL
0–200
Adjusts the volume of the output to the
external effects device.
[8]
RETURN
LEVEL
0–200
Adjusts the volume of the input from the
external effects device.