Boss Audio Systems GT-100 - Manual (Page 32)

32
Phrase Loop Play
Phrase Loop is a recorder function that lets you record up to 38
seconds (when using monaural recording) of audio, and play it
back by operating a pedal. By layering sounds as you continue
real-time recording and playback, you can create a wide variety of
performances.
You can record a phrase loop with effects, or you can add effects
after a loop has been recorded. Adding effects after-the-fact lets
you create special effects with recorded performances.
* Recorded phrases are deleted when Phrase Loop is switched off
or when the power is turned off.
Reference
For more about Phrase Loop operation, refer to “Advanced:
Phrase Loop” (p. 18).
Setting Phrase Loop
Phrase Loop offers a variety of modes. By changing the settings, you
can use this function in various ways.
Setting procedure
1.
Press the [SYSTEM] button .
2.
Turn knob [4] to select “PHRASE LOOP” in the left display .
3.
Use knobs [5]–[8] to select the desired settings .
Parameter Value Explanation
Page 1
[5] MODE
PERFORM
The sound processed by the
effects will be recorded.
This lets you create a variety
of performances by layering
different sounds.
PATCH EDIT
The sound before being
processed by the effects will be
recorded, and the effects will
be applied when the loop is
played back.
This is a convenient way
to adjust the effects, or to
compare the sound of different
patches.
[6] REC MODE
MONO
The phrase will be recorded
in monaural (maximum 38
seconds).
STEREO
The phrase will be recorded in
stereo (maximum 19 seconds).
[7] PLAY LEVEL 0–120
Specifies the phrase playback
volume.
[8] PEDAL FUNC
OFF
Phrase Loop will not operate
even if you press the [PHRASE
LOOP] pedal.
PHRASE LOOP
You can use the [PHRASE
LOOP] pedal to switch Phrase
Loop on/off or to record.
4.
Press the [EXIT] button to return to the Play screen .