Bosch DHD Model - Manual (Page 4)

4
Parts Needed (standard)
● Tape Measure
● Phillips Head Screwdriver
● Aluminum Duct Tape
● Ductwork (configuration varies depen-
ding on location; See pages 7-12 for fur-
ther information)
● Additional Sheetmetal screws (as neces-
sary for ductwork installation)
● Saw (or equivalent for cutting counter-
top)
● #8 x 1 1/4” Wood Screws (4)
● Plumb Bob
● Wire to reach Remote or Inline Blower
Parts Needed (special)
● Special Blower
● Transition Box (for use only with Inline
and Remote Blowers)
● Recirculation Module (used only for recir-
culation applications)
Note: Downdrafts work with these blo-
wers: 600 CFM Integrated, Remote or Inline
Blowers 1000 CFM Remote or Inline Blo-
wers
Parts Supplied
● Downdraft assembly (1)
● #8 Sheetmetal Screws (8)
● Blower Cord Strain Relief (1)
● Hardware for brackets on vent (2)
● Remote Blower Pigtail