Brother FAX-727 - Manual (Page 19)

10
FAX-737MC Control Panel Overview
6
4
5
3
7 8 11 12 9 10
13
14
15
16
17
2
1
1 Digital TAD
Lets you activate Message Centre.
Also, notifies you that you have voice or
fax messages in the memory.
2 LCD (Liquid Crystal Display)
Displays messages to help you set up and
operate your machine.
3 Navigation Keys:
Menu/Set
Lets you access the menu and
programming mode and stores your
settings in the machine.
or
Press to scroll forward or backward to set
a menu selection.
You can also use these keys to do an
alphabetical search for the names of
stored numbers.
Press to scroll through the menus and
options.
—OR—
You can press these keys to adjust the
beeper, ring or speaker volume.
or
4 Speaker Phone
Lets you speak to the person at the other
end and dial telephone and fax numbers
without lifting the handset.
5 Dial Pad
Dials phone and fax numbers and can be
used as a keyboard for entering
information into the machine.
# key lets you switch the dialling type
during a telephone call from "PULSE" to
"TONE". (Not available in New Zealand)
# key also lets you skip to the next
message when you are playing voice
messages and
key lets you repeat the
last message when you are playing voice
messages.
6 Redial/Pause
Re-dials the last number called. Also
inserts a pause in autodial numbers.
7 Search/Mute
Lets you dial stored phone numbers by
pressing
# and a two-digit number or lets
you look up numbers stored in the dialling
memory. Also, lets you put calls on hold.
8 Recall
Use this key to gain access to an outside
line and/or to recall the operator or
transfer a call to another extension when it
is connected to a PABX. (Australia &
New Zealand only)