Brother DCP 1000 - Manual (Page 85)

U S I N G T H E B R O T H E R M A C H I N E W I T H A N E W P O W E R M A C I N T O S H ® G 3 , G 4 O R I M A C ™ / I B O O K 11 - 1
11
YL4DCP-1000-FM5.5
11
Using the Brother machine
with a New Power Macintosh ®
G3, G4 or iMac ™ /iBook
Set up Your USB Equipped Apple
®
Macintosh
®
G3,G4, iMac ™ or iBook with
Mac OS 8.5/8.51/8.6/9.0/9.0.4/9.1
To work with your DCP your USB Equipped Apple ® Macintosh ® must be set
up with Mac OS 8.5/8.51/8.6/9.0/9.0.4/9.1 (The Brother Scanner Driver works
only with Mac OS 8.6/9.0/9.0.4/9.1)
Please check both www.brother.com and www.solutions.brother.com for the
OS X drivers and all driver updates.
Using Brother Printer Driver with Your Apple
®
Macintosh
®
To select the Printer:
1 From the Apple menu, open the Chooser.
2 Click the HL-1200/MFL Pro icon. On the right side of the Chooser, click the
printer to which you want to print. Close the Chooser.
Note
Before you can connect the machine to your Macintosh ® , you must purchase a
USB cable that is no longer than 6 feet (1.8 meters).