Brother MFC J6710DW - Manual (Page 68)

Chapter 8
62
Setting your changes as the
new default
8
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a
Press a or b and d or c to choose your
new setting.
Press OK.
Repeat this step for each setting you
want to change.
b
After changing the last setting, press
a
or b to choose Set New Default.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Restoring all settings to the
factory settings
8
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
True2Life, Cropping, Borderless and
Print Date, that you have changed, to the
factory settings.
a
Press a or b to choose
Factory Reset.
Press OK.
b
Press 1 to choose Yes.
c
Press Stop/Exit.
Scan to a memory card
or USB Flash memory
drive
8
Glass Scan Size
8
To scan a Legal, Ledger, A3 or A4 size
document, you need to change the
Glass ScanSize setting. The default
setting is Letter.
a
Press (SCAN).
b
Press a or b to choose
Scan to Media.
Press OK.
c
Press a or b to choose
Glass ScanSize.
d
Press d or c to choose Letter, Legal,
Ledger, A3 or A4.
Press OK.
Note
• You can save the setting you use most
often by setting it as the default. (See
Setting your changes as the new default
on page 62.)
• This setting is only available for scanning
documents from the scanner glass.