Brother MFC J6710DW - Manual (Page 10)

Chapter 1
4
LCD screen
1
Setting the backlight
brightness
1
You can adjust the brightness of the LCD
backlight. If you are having difficulty reading
the LCD, try changing the brightness setting.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Backlight.
e
Press d or c to choose Light, Med or
Dark.
Press OK.
f
Press Stop/Exit.
Setting the Dim Timer for the
backlight
1
You can set how long the LCD backlight stays
on after you go back to the Ready screen.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Dim Timer.
e
Press d or c to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f
Press Stop/Exit.
Setting the Wallpaper
1
You can change the wallpaper.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose Wallpaper.
Press OK.
e
Press a or b to choose your wallpaper
from the four available designs.
Press OK.
f
Press Stop/Exit.