Sharp LL-S201A User Manual
Page 7
2. CONNECTION and LIMITATION
2.1. CONNECTION
1. Connect the PC by USB cable and the image cable (Display port / HDMI).
2. Turn on a monitor.
3. Launch the service tool.
2.2. LIMITATION
To upgrade the scalar firmware, it is necessary to set the PC graphics board to its default
color settings.
2.3. USAGE
AT
MULTI
DISPLAY
When using this tool with a notebook PC, it is necessary to set a resolution setting for
LL-S201A to 1920x1080. Therefore, if the setting of the multi-screen is “Duplicate Display”,
please change the display setting to “Extended Display” with resolution as 1920x1080, and
set LL-S201A as primary display.
Moreover, the service tool should be operated at the LL-S201A side.
USB
Display Port (DP)
/ HDMI
AC adopter