Sharp LL-S201A - Manual (Page 22)

10. WHITE BLANCE STTINGS BACKUP / RESTORE（White Balance Settings）
10.1. Overview
The white balance setting is used to correct variations in each panel. When the panel is
not changed, take over the panel setting to suppress variations. When the panel is
changed, execute resetting to set the standard state.
10.2. How to operate (Backup / Restore)
[In case of board change]
1. Change PC and LL-S201A into a connection state before board exchange.
2. The file name of the serial number and a date is automatically generated on the text
box.
3. Push the Backup button to generate the file of a White Balance preset value to PC.
(By default, a file is created directly under a ServiceTool folder)
4. If file creation succeeds, the "Backup Success" message box will be displayed.
5. After exchanging the board, setup MODEL, Serial Number, Back light usage time.
6. Push the Browse button and select the file made at 3.
7. Push the Restore button to inherit the setting.
Memo: The screen may be blurred during execution of Restore.
8. If restoration succeeds, the "Restore Success" message box will be displayed.
[In case of exchange LCD module]
1. Exchange LCD module.
2. Change PC and LL-S201A into connection state.
3. Push the Browse button and choose standard configuration file defaultWB.txt.
4. Push the Restore button to inherit the default settings