Sharp LL-S201A - Manual (Page 19)

7. SETTING THE DESTINATION (MODEL)
7.1. Overview
When the board is exchanged by board failure, it is necessary to set the destination. It
can set up destination where there are three kinds, Japan, North America, Europe, and
Europe2( Russia / Italy).
7.2. How to operate
Change PC and LL-S201A into connection state.
1. Choose the destination as JP(0) / US(1) / EU(2) / RUS, ITA(3).
2. Push the Model Change button.
3. When it succeeds, the following message box will be displayed.
2
3
1