Sharp UP-600 - Manual (Page 57)

56
(6) Data clearing of the server sign-on state — master
You can clear the master’s server sign-on status flags in case of trouble.
This operation is effective only for the sign-on flag for servers who have remained signed on
at the master.
Clearing procedure
After selecting “DATA CLEAR” from the PGM2 mode menu with the same procedure as
steps 1 and 2 in “(1) Data clearing of the T-LOG buffer,” select “SIGN ON FLAG.”
NOTE
The server sales data for each server who has signed on is not collected when the manual
clearing of the sign-on state is performed. Server sales data is collected only when the
sign-off operation is done correctly at the satellites.
(7) Data clearing of the GLU/PBLU data in use — master
You can clear the GLU/PBLU data in use at the master in the event some trouble has
occurred.
This operation clears all GLU/PBLU data that is currently in use.
Clearing procedure
After selecting “DATA CLEAR” from the PGM2 mode menu with the same procedure as
steps 1 and 2 in “(1) Data clearing of the T-LOG buffer,” select “GLU USED FLAG.