Sharp UP-600 - Manual (Page 27)

26
3
IRC Programming
1. Setting the machine numbers — master and satellite
It is necessary to insure that each terminal has an assigned machine number to the master and
satellites prior to further IRC programming.
1.
Turn the mode switch to the PGM2 position.
2.
Select “SETTING” and press the [ENTER] key.
3.
Select “TERMINAL” and press the [ENTER] key.
Select “MACHINE#” from the TERMINAL menu and
press the [ENTER] key.
4.
Enter a machine number and press the [ENTER] key.
Machine number: up to 6 digits (0 - 999999)
5.
Repeat steps 1 to 4 for all machines in the IRC
system.
NOTE
In an IRC network, each machine number should be unique.
Do not use the same machine number for more than one machine.