Sharp UP-600 - Manual (Page 36)

35
(2) Maintenance downloading
To update preset data for the IRC system, use this downloading method. The preset data in
the master is downloaded to each satellite without clearing the existing preset data or
totalizers.
1.
Turn the mode switch to the PGM2 position.
2.
Select “MAINTE. D/L” and press the [ENTER] key.
The MAINTENANCE D/L menu will open.
3.
Select a preset data item for maintenance and press
the [ENTER] key.
If needed, enter the code range.
4.
If you wish to download the IRC programming data to
all satellites, select “ALL” and press the [ENTER] key.
If you wish to download the data to certain satellite(s),
select “MACHINE SELECT” and press the [ENTER]
key. In this case, the “MACHINE SELECT” menu will
open. Move the cursor to the corresponding machine
numbers, select “YES” by using the [ • ] key to toggle
your selection, and press the [ENTER] key.