Sharp UP-600 - Manual (Page 40)

39
(2) Assigning the second kitchen printer number to each remote printer —
master and satellite
With the following procedure, you can assign a second remote printer to which data should
be output when the first remote printer encounters an error during transmission of that data.
This assignment is made in the event a remote printer disconnection is necessary due to
printer breakdown or other troubles.
After the KP PRESET menu appears, proceed as follows:
1.
Move the cursor to the “SECOND KP” line and enter
the second kitchen printer number.
2.
Press the [ENTER] key to finish the programming for
the remote printer.
(3) Naming the remote printer — master and satellite
The programmed name will be printed together with other data on the remote printer.
This enables exact identification of the printout if the remote printer fails.
After the KP PRESET menu appears, proceed as follows:
Move the cursor to the “NAME” line and enter a desired
name for the remote printer.