Sharp UP-600 - Manual (Page 42)

41
(6) Specifying the format of chit printing — master and satellite
If so desired, each PLU/department item may be preset to output to the receipt printer in a
chit format.
With the following procedure, you can specify what items to be printed on chits.
1.
After programming for the KP PRESET items, press
the [ENTER] key.
2.
Move the cursor to the following CHIT FORMAT items
and select PRINT or SKIP with the [ • ] key (toggle
key).
Printing when quantity is one: PRINT/SKIP
PLU/department code: PRINT/SKIP
Unit price: PRINT/SKIP
Amount: PRINT/SKIP
The default setting for these items is SKIP.
3.
Press the [ENTER] key to finish the programming for
chit printing.