Sharp UP-600 - Manual (Page 26)

25
5. Server report
At the master, you can generate consolidated transaction reports on all servers or individual
servers by performing the reading or resetting operation.
At each satellite, you can generate consolidated transaction reports on individual servers by
performing the reading or resetting operation.
If a specific server is signed on at a machine when resetting operation for a consolidated
individual server report is executed at the machine, the data on transactions being handled by
the server is also added and printed out.
If that server is signed on at another machine, the message “IS SIGNED ON” is displayed, thus
the resetting operation for that server cannot be made.
Full server report sample
In the case of the UP-700:
Date
Machine no.
Consecutive no.
Time
Server name and code
Job code
Report mode
Report type
Data on server #0002 signed on
at machine no.000002
Reset counter
Server name
Data on server #0001
Server code