Sharp UP-600 - Manual (Page 39)

38
9. Programming for the remote printer
For connection of remote printers to the LAN, be sure to contact your dealer.
(1) Assigning kitchen printer numbers to remote printers — master and
satellite
With the following procedure, you can do programming for the remote printers connected to
the LAN. For initial setup of remote printers, please contact your authorized SHARP dealer.
1.
Turn the mode switch to the PGM2 position.
2.
Select “KP SETTING” and press the [ENTER] key.
The KP PRESET menu will open.
3.
Select the kitchen printer number to be programmed.
4.
Carry out the programming for the remote printer.
(See the following pages for programming for
individual remote printer items.)
• Be sure to consult your authorized SHARP dealer for
the correct settings.
5.
After programming for the remote printer, press the
[ENTER] key.