BenQ DLP PROJECTOR PE8700 - Manual (Page 50)

49
10. Factory OSD Operation
There are 10 pages in this OSD, the ways to enter factory OSD are open user OSD, then
press power on button. If you have to return user OSD, open factory OSD and press power
on button again.
Go to \User OSD\Environment\lamp hours\minutes, then press Right, Left, Right, Left,
Enter in a row to switch to factory OSD.
1. Factory
This page is mostly for our factory to use.
Page Items Comment
Return User OSD Quit Factory OSD and return user OSD
Save Settings Save current settings of factory OSD to EEPROM
Load Saved Settings
Load previous saved settings from EEPROM
Load Factory Default Load factory default
Load All User Default
Restore all settings of user
OSD and PC/HD timing parameters
Burn In Mode Burn-In mode On/Off
Burn In Timer Setup hours Set burn-in hours
Burn In Timer Running hours &
minutes
Running hours of burn-in mode
RS232 Baudrate Set baudrate of RS2329600 or 115200
OSD Timer OSD automatic off time
Usage Hour Record total usage hours of this projector
Factory
Software version Software version