Nokia N75 - Manual (Page 64)

Cam
er
a
31
Image quality — Print 2M - Large (1600x1200 resolution),
Print 1M - Medium (1152x864 resolution) or Multimedia
message 0.3M - Small (640x480 resolution) If you want
to print the image, select Print 2M - Large . If you want to
send it through e-mail, select Print 1M - Medium . To send
the image through MMS, select Multimedia message
0.3M - Small .
Add to album —Select whether you want to save the image
to a certain album in Gallery. If you select Yes , a list of
available albums opens.
Show captured image —Select On if you want to see the
captured image after it is taken or Off if you want to
continue taking pictures immediately.
Default image name —Define the default name for the
captured images.
Extended digital zoom —Select On to allow the zoom
increments to be smooth and continuous between digital
and extended digital zoom. If you want to limit the zoom to
where the selected image quality is maintained, select
Off .
Capture tone —Select the tone you want to hear when you
take a picture.
Memory in use —Select where to store your images.
Restore camera settings —Select OK to return the default
values to the camera settings.
Flash
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions.
The following flash modes are available for the still
image camera:
Automatic ( ), On ( ), and Off ( ).
To select the desired flash mode, use the active toolbar.
Adjust color and lighting
To enable the camera to reproduce colors and lighting more
accurately, or to add effects to your pictures or videos,
scroll through the active toolbar. Select from the following
options:
Scene modes , Flash mode , Switch to sequence
mode , Exposure compensation , White balance and Color
tone . Not all options are available in Video mode .
The screen display changes to match any settings you make,
so that you see how the change affects the pictures or videos.
These settings return to the default settings when you
close the camera.
If you select a new scene, the color and lighting settings are
replaced by the selected scene. See "Scenes," p. 32. You can
change the settings after selecting a scene if necessary.
N75.EN_ESv1_BIL_9252942.book Page 31 Monday, April 2, 2007 3:31 PM