Nokia N75 - Manual (Page 135)

Tool
s
102
1 Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, select
Gallery .
2 Select the item and Options > Send > Via Bluetooth .
Devices with Bluetooth wireless technology within
range start to appear on the display.
Device icons: computer, phone, audio or
video device, and other device.
To interrupt the search, select Stop .
3 Select the device with which you want to connect.
4 If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See "Pair devices," p. 102.
5 When the connection has been established, Sending
data is shown.
The Sent folder in Messaging does not store messages sent
using Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To
find the unique address of your device, enter the
code *#2820# in the standby mode.
Pair devices
To open the paired devices view ( ), in the Bluetooth
application main view, press .
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select Options > New paired device .
Devices with Bluetooth wireless technology within range
start to appear on the display. Select the device, and enter
the passcode. The same passcode must be entered on the
other device as well. After pairing, the device is saved to
the paired devices view.
Paired devices are indicated by in the device search.
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorized —Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you trust.
indicates authorized devices in the paired devices view.
Set as unauthorized —Connection requests from this device
must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete . If you want to cancel all pairings,
select Options > Delete all .
N75.EN_ESv1_BIL_9252942.book Page 102 Monday, April 2, 2007 3:31 PM