Nokia N75 - Manual (Page 134)

Tool
s
101
My phone's visibility —To allow your device to be found by
other devices with Bluetooth wireless technology, select
Shown to all . To hide it from other devices, select Hidden .
My phone's name —Edit the name of your device.
Remote SIM mode —To enable another device, such as a
compatible car kit enhancement, to use the SIM in your
device to connect to the network, select
On .
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See "Pair devices," p. 102. Activate the
remote SIM mode from the other device.
When remote SIM mode is on in your device, Remote SIM
is displayed in the standby mode. The connection to the
wireless network is turned off, as indicated by
in the
signal strength indicator area, and you cannot use SIM
services or features requiring cellular network coverage.
When the wireless device is in the remote SIM mode, you can
only use a compatible connected enhancement, such as a
car kit, to make or receive calls. Your wireless device will
not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select
Exit rem. SIM mode .
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden .
Do not pair with an unknown device.
Send data using Bluetooth connectivity
Several Bluetooth connections can be active at a time. For
example, if you are connected to a compatible headset,
you can also transfer files to another compatible device at
the same time.
Bluetooth connectivity indicators
• When is shown in the standby mode,
Bluetooth connectivity is on.
• When is blinking, your device is trying to connect
with another device.
• When is shown continuously, data is being
transmitted using Bluetooth connectivity.
Tip! To send text using Bluetooth connectivity, select
Notes , write the text, and select Options > Send >
Via Bluetooth .
N75.EN_ESv1_BIL_9252942.book Page 101 Monday, April 2, 2007 3:31 PM