Nokia N75 - Manual (Page 119)

Pe
rso
n
a
liz
e you
r d
evi
ce
86
If you want the caller’s name to be said when your device
rings, select
Options > Customize , and set Say caller's
name to On . The caller’s name must be saved in Contacts .
To create a new profile, select Options > Create new .
3-D tones
3-D tones enable three-dimensional sound effects for your
ringing tones (not all ringing tones support 3-D tones ).
Press , and select Tools > 3-D tones .
To enable 3-D tones for all your ringing tones, select 3-D
ringing tones > On .
To change the three-dimensional effect for a ringing tone,
do the following:
1 Select Ringing tone and the ringing tone you want
to change.
2 Select Sound trajectory and from the following settings:
Trajectory speed —Scroll left or right to adjust the speed
at which sound moves from one direction to another.
This setting is not available for all ringing tones.
Doppler effect —Select On if you want the ringing tone
to appear to change as you get closer to the device, or
further away from it. The ringing tone appears to become
higher as you get closer to the device, and to become
lower as you get further away. This setting is not
available for all ringing tones. The Doppler effect is not
available for all sound trajectories.
Reverberation —Select the reverb type.
To listen to the ringing tone with the three-dimensional
effect, select
Options > Play tone . To listen to 3-D tones , use
the stereo loudspeakers on your device, or a stereo headset.
Offline profile
The Offline profile lets you use the device without connecting
to the wireless network. When you activate the Offline
profile, the connection to the wireless network is turned off,
as indicated by
in the signal strength indicator area. All
wireless RF signals to and from the device are prevented. If
you try to send messages, they are placed in the outbox to be
sent later. If a Bluetooth connectivity is activated before
entering the
Offline profile, it will be deactivated.
Warning: In the Offline profile you cannot make
(or receive) any calls, except make calls to certain
emergency numbers, or use other features that
require network coverage. To make calls, you must
first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
To leave the Offline profile, press the power key, and select
another profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a Bluetooth
connectivity was activated before entering the
Offline
profile, it is automatically reactivated after leaving the
Offline profile. See "Settings," p. 88.
N75.EN_ESv1_BIL_9252942.book Page 86 Monday, April 2, 2007 3:31 PM