Nokia N78 - Manual (Page 33)

If you want the caller’s name to be spoken when your
device rings, select Options > Personalise > Say
caller's name > On . The caller’s name must be found
in Contacts.
To create a new profile, select
Options > Create
new .
3-D tones
Press , select Tools > Utilities > 3-D tones .
With 3-D tones, you can enable three-dimensional
sound effects for ringing tones. Not all ringing tones
support 3-D effects.
To enable the 3-D effects, select
3-D ringing tone
effects > On . To change the ringing tone, select
Ringing tone and the desired ringing tone.
To change the 3-D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect.
To modify the effect, select from the following settings:
● Trajectory speed — Scroll left or right to adjust the
speed at which sound moves from one direction to
another. This setting is not available for all ringing
tones.
● Reverberation — Select the type of echo.
● Doppler effect — Select On to have the ringing
tone sound higher when you are closer to your
device, and lower when you are farther away. When
you get closer to the device, the ringing tone seems
to become higher, and lower when you move away
from it. This setting is not available for all ringing
tones.
To listen to the ringing tone with the 3-D effect, select
Options > Play tone . If you enable the 3-D tones but
do not select any 3-D effect, stereo widening is applied
to the ringing tone.
To adjust the ringing tone volume, select
Tools >
Profiles > Options > Personalise > Ringing
volume .
Modify the standby mode
To change the look of the standby mode, press , and
select Tools > Settings > General >
Personalisation > Standby mode > Standby
33
Persona
lise
your de
vice