Nokia N78 - Manual (Page 100)

Pair devices
To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity,
scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other device
to use the same code. Devices that do not have a user
interface have a factory-set passcode. The passcode is
used only once.
1. To pair with a device, select Options > New
paired device . Devices that are within range are
displayed.
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device as
well.
3. Some audio enhancements connect automatically
to your device after pairing. Otherwise, scroll to the
enhancement, and select Options > Connect to
audio device .
Paired devices are indicated by in the device search.
To set a device as authorised or unauthorised, scroll to
the device, and select from the following options:
● Set as authorised — Connections between your
device and the authorised device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or PC or
devices that belong to someone you trust.
indicates authorised devices in the paired devices
view.
● Set as unauthorised — Connection requests from
this device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete .
If you want to cancel all pairings, select Options >
Delete all .
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if you
want to accept the message. If you accept, is
displayed, and the item is placed in the Inbox folder in
Messaging. Messages received through Bluetooth
connectivity are indicated by .
Tip: If your device notifies you that the memory
is full when you try to receive data through
Bluetooth connectivity, change memory card as
the memory where the data is stored.
Block devices
Press , and select Tools > Bluetooth .
To block a device from establishing a Bluetooth
connection to your device, scroll right to open Paired
100
Con
nectio
ns