Nokia N97 - Manual (Page 75)

WLAN internet access points
Select Menu > Settings and Connectivity >
Destinations > Access point , and follow the
instructions.
To edit a wireless LAN (WLAN) access point, open one
of the access point groups, and select an access point
marked with . Follow the instructions from your
WLAN service provider. Select from the following:
● Wi-Fi network name — Select Enter manually or
Search for networks . If you select an existing
network, WLAN network mode and WLAN security
mode are determined by the settings of its access
point device.
● Network status — Define whether the network
name is displayed.
● Wi-Fi network mode — Select Ad-hoc to create an
ad hoc network and to allow devices to send and
receive data directly; a WLAN access point device is
not needed. In an ad hoc network, all devices must
use the same WLAN network name.
● Wi-Fi security mode — Select the encryption used:
WEP , 802.1x , or WPA/WPA2 (802.1x and WPA/
WPA2 are not available for ad hoc networks). If you
select Open network , no encryption is used. The
WEP, 802.1x, and WPA functions can be used only if
the network supports them.
● Homepage — Enter the web address of the starting
page.
● Use access point — Set the device to create a
connection using this access point automatically or
after confirmation.
Available options may vary.
Active data connections
Select Menu > Settings and Connectivity >
Connection mgr. .
In the active data connections view, you can see open
data connections:
data calls
packet data connections
wireless LAN (WLAN) connections
To end a connection, select Options > Disconnect .
To end all open connections, select Options >
Disconnect all .
To view the details of a connection, select Options >
Details .
Synchronization
Select Menu > Settings and Connectivity > Data
transfer > Sync .
The Synchronization application enables you to
synchronize your notes, calendar entries, text and
75
Co
nnect
ivi
ty