Nokia N97 - Manual (Page 102)

— Adjust contrast (images only). Adjust the
difference between the lightest and darkest parts of
the image.
— Adjust sharpness (images only).
The screen display changes to match the settings you
define.
The capture settings are shooting-mode specific.
Switching between the modes does not reset the
defined settings.
If you select a new scene, the capture settings are
replaced by the selected scene. You can change the
capture settings after selecting a scene, if needed.
Saving the captured image may take longer if you
change the zoom, lighting, or color settings.
Capture images
When capturing an image, note the following:
● Use both hands to keep the camera still.
● The quality of a digitally zoomed image is lower
than that of a non-zoomed image.
● The camera goes into battery saving mode if there
are no actions for about a minute. To continue
capturing images, select Continue .
● Keep a safe distance when using the flash. Do not
use the flash on people or animals at close range. Do
not cover the flash while taking a picture.
To capture an image with the main camera, do the
following:
1. To switch from video mode to image mode, if
necessary, select > .
2. To capture an image, press the capture key. Do not
move the device before the image is saved and the
final image displayed.
Capture images with secondary camera — To
capture an image, select . Do not move the device
before the image is saved and the final image
displayed.
To zoom in or out when capturing an image, use the
zoom keys.
To leave the camera open in the background and use
other applications, press the menu key. To return to
the camera, press and hold the capture key.
On-screen controls and indicators
for still image capture
The still image viewfinder displays the following:
102
Ca
mera