Nokia N97 - Manual (Page 74)

group, tap the relevant access point if it is not already
highlighted, and select Options > Organize > Copy
to other dest. .
To change the priority of an access point within the
group, select Options > Organize > Change
priority .
Packet data access points
Select Menu > Settings and Connectivity >
Destinations > Access point , and follow the
instructions on the screen.
To edit a packet data access point, open one of the
access point groups, and select an access point marked
with .
Follow the instructions from your service provider.
Select from the following:
● Access point name — You obtain the access point
name from your service provider.
● User name — The user name may be needed to
make a data connection, and is usually provided by
your service provider.
● Prompt password — If you must enter the
password every time you log in to a server, or if you
do not want to save your password in the device,
select Yes .
● Password — A password may be needed to make
a data connection and is usually provided by your
service provider.
● Authentication — Select Secure to always send
your password encrypted or Normal to send your
password encrypted when possible.
● Homepage — Depending on the access point you
are setting up, enter the web address or the address
of the multimedia message center.
● Use access point — Select After confirmation if
you want the device to ask for confirmation before
the connection using this access point is created, or
Automatically if you want the device to connect to
the destination using this access point
automatically.
Select Options > Advanced settings and from the
following:
● Network type — Select the internet protocol type
to transfer data to and from your device. The other
settings depend on the selected network type.
● Phone IP address (for IPv4 only) — Enter the IP
address of your device.
● DNS addresses — Enter the IP addresses of the
primary and secondary DNS servers, if required by
your service provider. To obtain these addresses,
contact your internet service provider.
● Proxy server address — Enter the address of the
proxy server.
● Proxy port number — Enter the port number of
the proxy server.
74
Co
nnect
ivi
ty