Nokia 6360 - Manual (Page 76)

[ 65 ]
Use advanced calling features
8
The first phone number on this list is the currently selected number.
You need at least one active number to make and receive calls and to
use mobile messaging services.
Select digital or analog
Your phone can work in both digital and analog modes. The default mode
is digital and analog, which appears on your phone as Digit. & analog
when you press Menu 4-6-7 (Settings > Network services > System
selection).
This means that your phone uses both digital and analog voice channels.
The phone always tries to find a digital voice channel first, but if a digital
voice channel is not available, the phone looks for an analog voice channel.
Note: This feature is available only for certain phones. Contact
your service provider for more information.
• SET TOUCH TONES
Touch tones (or DTMF tones) are sounds that are produced when you press
the keys on your phone’s keypad. You can use touch tones for many
automated over-the-phone services such as checking bank balances and
airline schedules and using your voice mailbox. Touch tones can be sent
only when a call is active.
Warning: If you send touch tones while in the analog mode, be
careful not to send confidential information.
Set manual touch tones
1 Press Menu 4-4-2-1 (Settings > Phone settings > Touch tones >
Manual touch tones)
2 Select one of the following options, and then press Select:
Continuous The tone sounds for as long as you press and hold a
key.