Nokia 6360 - Manual (Page 67)

8
[ 56 ]
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1 When prompted for the calling card’s access number, enter the
number and press OK.
This number is usually the 1-800 number that is listed on the
calling card.
2 When prompted to enter a calling card number (usually shown on
the front of the calling card) and PIN number, enter the number, and
press OK.
3 Press OK again when the Save changes? message appears.
4 Use or to scroll to Card name, press Select, and enter
the card name using your phone’s keypad.
5 Press OK.
Choose a calling card to use
If you have more than one calling card, you’ll need to choose one before
making a call.
1 Press Menu 4-3-2 (Settings > Call settings > Calling card).
Enter your security code when prompted.
2 Scroll to the desired card and press Options.
3 Press or to highlight Select and press OK.
4 Enter your security code and press OK.
The message Card ready for use appears.
Make a calling card call
5 Enter the phone number, including any prefix (such as 0 or 1) your
calling card might require when you make a calling card call.
See your calling card for instructions.
6 Press and hold until your phone displays the message Card call