Toshiba Pocket PC e750 - Manual (Page 154)

ATI Presentation Pack
User's Manual 10-9
TOSHIBA Pocket PC e750 Version
1
Last Saved on 17/02/2003 14:46
ENGLISH using Euro_C.dot –– Printed on 17/02/2003 as e750
End Show
This command terminates the Slide Show playback mode and returns to
the mode you were using prior to entering Slide Show mode. The Action
button on your Pocket PC can also be used to exit Slide Show mode.
VGA Slide Show
VGA Slide Show mode operates almost identically to the Slide Show
mode, except for the following operational differences:
■ You should use the VGA Output tab in the Tools > Options...
command to set VGA output-related options. You can also elect to
have IA Presenter perform dithering for your slide if you project your
slide to an external VGA/video device with less color capability (such
as only 256 colors available).
■ During VGA Slide Show mode, the presentation output will be directed
to both the Pocket PC’s LCD screen and the external connected VGA
device or video device. The Pocket PC will always show the reduced
size version, while the VGA/video device will view the original
matching dimensions set during ActiveSync conversion. Or if your
current presentation has a dimension specified which is different from
the exact dimension of your selected output dimension, IA Presenter
will automatically re- size the slides to fit the output dimensions.
■ The Ink annotation will be projected to both the VGA video device and
the LCD screen.
■ You can use VGA Zoom on the pop-up menu to designate an area on
a slide during VGA Slide Show view, and project that specific area to
the VGA screen (on top of the already-existing projection of the entire
slide). Use the VGA Zoom Size command to specify an area of
predefined size, or manually drag your stylus on the LCD screen to
specify the desired area of the slide. Then use the VGA Zoom Ratio
command to choose the ratio at which you want the zoomed area to
be projected. After the “zoom window” has been created, it can be
dragged to enclose other portions of the slide on your LCD screen,
and this movement will also be reflected in the projected image on the
VGA output.
■ You can use the VGA Pointer command on the pop-up menu to
enable movements of your stylus on the LCD screen to simulate a
laser pen light on the VGA screen during VGA Slide Show
presentations.
■ In addition to being able to draw digital Ink annotation on your slides,
you can project a black screen to the VGA output and write or draw
projected Ink on it. To use Ink on the blank screen, make sure you are
in Pen mode on the Slide Show pop-up menu before selecting Blank
from the Screen submenu.
In addition, before a VGA Slide Show can be projected to a VGA screen,
you must specify the appropriate settings. Select Options... from the
Tools Menu, then tap VGA Output.
More information about the General, File, Display, and VGA Output tabs
are included in the on-line Help.