Installing the battery pack -10, Installing the battery pack – Toshiba Satellite 2670 User Manual
Page 80

6-10 Power and Power-Up Modes
User's Manual
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as IM_267UK
Installing the battery pack
To install a battery, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
Toshiba as replacements.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Hold the battery so that the label faces down and the connectors on
the battery face the connectors on the computer.
4. Lay the battery in the cover and make sure it is secured by the latches.
Inserting the battery pack