Toshiba Satellite 2670 - Manual (Page 24)

1-8 Introduction User's Manual
Satellite 2670/2710 User's Manual – 2670_UK.doc – ENGLISH – Printed on 19/01/00 as IM_267UK
Standby In Standby mode, power to the system remains
on, but the CPU and all other devices are in
sleep mode. When the computer is in standby
mode, the Power LED glows orange. To enter
Standby mode click Start, click Shut Down,
select Standby and click OK. The computer
enters Standby mode regardless of the Hibernate
setting.
Before entering standby mode, be sure to save your data.
Do not install or remove a memory module while the computer is in
Standby mode. The computer or the module could be damaged.
Do not remove the battery pack while the computer is in Standby mode.
Data in memory will be lost.
Utilities
This section describes preinstalled utilities and tells how to start them. For
details on operations, refer to each utility’s online manual, help files or
read.me files.
Power Saver Utility To access this power savings management
program, open the Control Panel and double-
click the Power Saver icon.
Hardware Setup This program lets you customize your hardware
settings according to the way you work with your
computer and the peripherals you use. To start
the utility, click the Windows Start button, point to
settings and click Control Panel. In the Control
Panel, double-click the Toshiba Hardware Setup
icon.
Toshiba Services This program lets you enable or disable pop up
windows for power settings, CD power button for
system on and CD control buttons. You can also
select play for CD only (turns on DVD drive only)
or CD/DVD (turns on the system). To start the
utility, click the Windows Start button, point to
Settings and click Control Panel. In the Control
Panel double-click the Toshiba Services icon.