Toshiba Portege R200 (PPR21) - Manual (Page 103)

User’s Manual 6-14
Power and Power-Up Modes
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack.
Securing the battery cover
5. Return your computer to the upright position.
High Capacity 2nd Battery Pack
A High Capacity 2nd Battery Pack can increase the battery-based
operating time of the computer. To increase the battery-based operating
time, connect the High Capacity 2nd Battery Pack to the computer. This
section explains the installation and removal of the High Capacity 2nd
Battery Pack.
Connecting the High Capacity 2nd Battery Pack
Follow the steps below to connect the computer to the High Capacity 2nd
Battery Pack.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
Do not touch the battery release latch while holding the computer. Or you
may get injured by the dropped battery pack by unintentional release of the
battery release latch.
Battery pack
Before you connect the High Capacity 2nd Battery Pack, make sure you
turn off the computer and disconnect the AC Adaptor and any other
external devices.