Toshiba Tecra S4 - Manual (Page 176)

9-14 User’s Manual
Troubleshooting
USB mouse
Fingerprint Sensor
Problem Procedure
On-screen pointer
does not respond to
mouse operation The system might be busy. If the pointer is
shaped as an hourglass, wait for it to resume its
normal shape and try again to move it.
Make sure the mouse is properly connected to
the USB port.
Double-clicking does
not work Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as required and
click OK.
The mouse pointer
moves too fast or too
slow Try changing the speed setting in the mouse
control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Pointer Options tab.
3. Set the speed as required and click OK.
The mouse pointer
moves erratically The mouse might be dirty. Refer to your mouse
documentation for instructions on cleaning.
If problems persist, contact your dealer.
Problem Procedure
Reading of the
fingerprint was not
successful. Please try again using the correct posture. Refer
to
Using the Fingerprint Sensor in Chapter 4,
Operating Basics .
Try the recognition process again using another
enrolled finger.
The fingerprint cannot
be read due to injuries
to the finger. Try the recognition process again using another
enrolled finger.
If fingerprints from all the enrolled fingers cannot
be read, please logon by using the keyboard to
input the password for the time being.
If problems persist, contact your dealer.