Dual pointing device – Toshiba Tecra S4 User Manual
Page 175
User’s Manual
9-13
Troubleshooting
Dual Pointing Device
If you are using a USB mouse, also refer to the
chapter and to your mouse documentation.
Touch Pad/AccuPoint
Problem
Procedure
Either the Touch Pad
or the AccuPoint does
not work.
Check the Device Select settings. Click start,
click Control Panel, click Printers and Other
Hardware and select Mouse icon. Open the
Mouse Properties and click Dual Pointing
Device tab. Then click the Detail Setting button
and click the Device Select tab.
Check whether the Touch Pad is selected or not.
Pressing Fn + F9 to enable TOSHIBA Dual
Pointing Device.
On-screen pointer
does not respond to
Pad operation
The system might be busy. If the pointer is
shaped as an hourglass, wait for it to return to its
normal shape and try again to move it.
The mouse pointer
moves too fast or too
slow
Try changing the speed setting in the mouse
control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Pointer Options tab.
3. Set the speed as required and click OK.
Double-tapping (Touch
Pad) or double-
clicking (AccuPoint)
does not work
Try changing the double-click speed setting in
the mouse control utility.
1. Click start, click Control Panel, click
Printers and Other Hardware and select
Mouse icon.
2. Click the Buttons tab.
3. Set the double-click speed as required and
click OK.
If problems persist, contact your dealer.