Toshiba Tecra S4 - Manual (Page 131)

User’s Manual 7-3
HW Setup & BIOS Setup
Boot Priority
Boot Priority Options
This tab allows you to select the priority for booting the computer - the
following settings are available:
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
* 1 The floppy diskette drive will be used to start the computer when it
contains a bootable disk. If an SD memory device is installed as well, the
external floppy diskette drive will be checked first, followed by the SD
memory device.
* 2 CD-ROM is looked for when the boot disc is contained in external optical
disc drive.
HDD
−> FDD −>
CD-ROM
−> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive*
1 ,
CD-ROM* 2 and LAN (Default).
FDD
−> HDD −>
CD-ROM
−> LAN
The computer looks for bootable files in the
following order: floppy disk drive*
1 , HDD,
CD-ROM* 2 and LAN.
HDD
−> CD-ROM −>
LAN
−> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM*
2 , LAN and
floppy disk drive* 1 .
FDD
−> CD-ROM −>
LAN
−> HDD
The computer looks for bootable files in the
following order: floppy disk drive*
1 , CD-ROM* 2 ,
LAN and HDD.
CD-ROM
−> LAN −>
HDD
−> FDD
The computer looks for bootable files in the
following order: CD-ROM*
2 , LAN, HDD, floppy
disk drive* 1 .
CD-ROM
−> LAN −>
FDD
−> HDD
The computer looks for bootable files in the
following order: CD-ROM*
2 , LAN, floppy disk
drive* 1 and HDD.
U Selects the USB floppy disk drive.
N Selects the network.
1 Selects the primary HDD.
2 Selects the secondary HDD.
C Selects the CD-ROM* 2 .
M Selects the USB Memory.