beautypg.com

Dvd super multi drive double layer – Toshiba Portege A600 User Manual

Page 105

background image

User’s Manual

4-22

Operating Basics

You cannot back up CD-ROM, CD-R or CD-RW media to DVD-R or

DVD-RW media using the 'Disc Backup' function of TOSHIBA Disc

Creator.

You cannot back up CD-ROM, CD-R or CD-RW media to DVD+R or

DVD+RW media using the "Disc Backup" function of TOSHIBA Disc

Creator.

You cannot back up DVD-ROM, DVD Video, DVD-R, DVD-RW, DVD+R

or DVD+RW to CD-R or CD-RW media using the 'Disc Backup' function

of TOSHIBA Disc Creator.

TOSHIBA Disc Creator cannot record in packet format.

You might not be able to use the "Disc Backup" function of TOSHIBA

Disc Creator to back up a DVD-R, DVD-RW, DVD+R or DVD+RW disc

that was made with other software on a different optical media recorder.

If you add data to a DVD-R or DVD+R disc that you have already

recorded to, you might not be able to read the added data under some

circumstances. For example, it cannot be read under 16-bit operating

systems, such as Windows 98SE and Windows Me, while in Windows

NT4 you will need Service Pack 6 or later, and in Windows 2000, you

will need Service Pack 2. In addition to this, some DVD-ROM and

DVD-ROM/CD-R/RW drives cannot read this added data regardless of

the operating system.

TOSHIBA Disc Creator does not support recording to DVD-RAM discs -

to achieve this you should use Windows Explorer or another similar

utility.

When you back up a DVD disc, be sure that the source drive supports

recording to DVD-R, DVD-RW, DVD+R or DVD+RW media - if this is

not the case then the source disc might not be backed up correctly.

When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW disc, be

sure to use the same type of disc.

You cannot partially delete any data written to a CD-RW, DVD-RW or

DVD+RW disc.

DVD Super Multi drive Double Layer

You can use the DVD Super Multi drive to write data to either CD-R,

CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double

Layer), DVD+RW or DVD-RAM discs. The TOSHIBA Disc Creator is

provided as writing software with this computer.

Please refer to the

Writable discs

, Chapter 2 for details about the types

of writable CD and DVD discs that can be supported by this computer.

Do not turn off the power to the optical disc drive while the computer is

accessing it as this may cause you to lose data.

To write data to CD-R/-RW media, use the TOSHIBA Disc Creator

feature that is installed on your computer.

When the power of the optical disc drive is off, the disc tray will not

open even if the eject button is pushed. Use the ODD to turn the power

of the optical disc drive on. Please refer to Chapter 5,

Hot keys

.

This manual is related to the following products: