Toshiba PORTEGE R700 - Manual (Page 78)

Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
Select HD Format
To select the display mode, follow the steps as detailed below:
1.
Click Start and click Control Panel.
2. Click Appearance and Personalization.
3. Click Display.
4. Click Change Display settings.
5. Click Advanced settings.
6. Click List All Modes.
7. Select the one of the below selection at List All Modes.
Display mode at "List All Modes" HD Format
1920 by 1080, True Color (32bit),
60Herts 1080p
1920 by 1080, True Color (32bit),
30Herts (Interlaced) 1080i
1280 by 720, True Color (32bit),
60Herts 720p
720 by 576, True Color (32bit),
50Herts 576p
720 by 480, True Color (32bit),
60Herts 480p
The above display mode is a typical HDMI display mode. The selectable
display modes will vary for different HDMI monitors.
TOSHIBA Hi-Speed Port Replicator
In addition to the ports available on the computer, the TOSHIBA Hi-Speed
Port Replicator also provides several kinds of ports.
The TOSHIBA Hi-Speed Port Replicator connects directly to the docking
interface on the underside of the computer. The AC adaptor connects the
TOSHIBA Hi-Speed Port Replicator to a power source.
You must connect the AC adaptor before you connect to a TOSHIBA
Hi-Speed Port Replicator.
PORTÉGÉ R700 / Satellite R630
User's Manual 3-33